Internally Threaded Curved Barbell | Implant-Grade Titanium
Internally threaded curved barbells at Khrysos are made from ASTM F-136 implant-grade titanium, available in 14G and 16G, in complete barbell or post-only configurations. Every piece is APP Phase 1 and 2 verified and sized for rook, eyebrow, navel, and daith piercings. Browse the collection below.
What Makes an Internally Threaded Curved Barbell Different
The threading system is the most important spec to understand before buying any curved barbell internally threaded or otherwise, and it is also the one most frequently overlooked.
On an externally threaded barbell, the threads are cut directly into the outside of the post. When you insert the jewelry, those raised threads drag across the piercing channel and cause micro-abrasions in the tissue. For a straight labret or tongue bar, the damage is minimal. For a curved barbell threading through a rook or eyebrow at an angle, the contact is more pronounced and the risk to a healing fistula is higher.
An internally threaded curved barbell works differently. The threads are cut into a hollow cavity inside each end of the post, and the decorative ball or end screws into that cavity from the outside. The post surface itself is completely smooth. When you insert an internally threaded titanium curved barbell, the exterior of the bar makes no contact with threads at all. Tissue passes over a polished, uninterrupted surface.
The APP recommends internally threaded or threadless jewelry as the standard for initial piercings and jewelry changes precisely because of this distinction. For curved placements that already put mechanical pressure on tissue during insertion, eliminating thread contact is not a cosmetic preference. It is a material difference in how the jewelry interacts with healing tissue.
Placement Guide for Titanium Internally Threaded Curved Barbells
Curved barbells follow the natural contour of the body, which makes them the correct format for several specific piercing placements. Gauge and length vary by location, and selecting the right combination from the start shortens healing time and reduces the chance of migration.
Common placements and typical sizing for an internally threaded titanium curved barbell:
Rook: 16G (1.2mm), 6-8mm length. Tight anatomy in the upper ear antihelix; a shorter bar prevents movement against the cartilage during healing.
Eyebrow: 16G (1.2mm), 8-10mm length. Surface placement above the brow; 8mm is the standard starting length with room for swelling, downsized after healing.
Daith: 16G (1.2mm), 8-10mm length. Follows the crease of the inner ear; the curve of the barbell mirrors the anatomy of the placement.
Navel: 14G (1.6mm), 10-12mm length. Standard gauge for belly button piercings; heavier tissue and a longer healing window make 14G the APP-recommended gauge here.
Snug and anti-tragus: 16G (1.2mm), 6-8mm length. Compact cartilage placements where a shorter, tightly curved bar sits flush against the ear.
Each body is different, and these are typical ranges rather than universal sizing. Your piercer measures your specific anatomy and determines the correct length for your initial jewelry. For a replacement piece on a healed piercing, matching the gauge and length of your current jewelry is the most reliable method.
Shop Titanium Internally Threaded Curved Barbells at Khrysos
The collection covers two titanium curved barbell formats: complete barbells with ball ends included, and post-only shafts for piercers and collectors who pair them with custom internally threaded ends. All pieces are ASTM F-136 titanium, manufactured under ISO9001 certification, and shipped same day.
Complete Curved Barbells
Complete barbells include the curved post and two internally threaded ball ends ready to wear. These are the right choice for most buyers replacing jewelry on a healed piercing or adding a new piece.
- 16G Curved Barbell - Internally Threaded: 16G, complete with ball ends. Standard choice for rook, eyebrow, daith, and snug placements.
- 14G Curved Barbell - Internally Threaded: 14G, complete with ball ends. The standard gauge for navel and other 14G curved placements.
Post-Only Curved Barbell Shafts
Post-only shafts are for piercers and collectors who already own internally threaded decorative ends and need a fresh post, or who want to build a custom configuration. The smooth post ships without ends and pairs with any compatible internally threaded end of the same gauge.
- 14G Curved Barbell Post (internally threaded): post only, 14G. Pairs with any 14G internally threaded end.
- 16G Curved Barbell Post (internally threaded): post only, 16G. Pairs with any 16G internally threaded end.
Compatible decorative ends for both gauges are available in the Titanium Internally Threaded Ends collection.
Specialty Styles
For wearers who want something beyond a standard ball end on their internally threaded titanium curved barbell, Khrysos also carries two specialty finishes.
- 16G Curved Barbell with Plain Dome: low-profile dome end in place of a round ball, sits closer to the skin and works well for placements where a smaller footprint reduces snagging.
- 16G Curved Barbell with Gem Ball: CZ gem-set ball end for a decorated look on healed rook or eyebrow piercings.
ASTM F-136 Titanium and Why It Matters for Curved Piercings
Not all titanium sold as implant grade meets the same standard, and for a titanium curved internally threaded barbell that sits in healing tissue for months, the difference is not cosmetic.
ASTM F-136 specifies the exact alloy composition for implant-grade titanium: Ti-6AL-4V-ELI, with strict limits on trace elements including iron, oxygen, and carbon. A piece labeled "G23 titanium" or "implant grade" by a seller who does not provide a mill certificate may be a different alloy entirely. G23 is a grade designation that originates from Chinese manufacturing standards, and its composition is not always identical to ASTM F-136.
Khrysos provides a titanium mill certificate for every production lot, available on the certifications page, so buyers and piercers can confirm the material specification before it is placed in a client.
For curved placements specifically, the long healing window amplifies the importance of material quality. A rook piercing typically heals in 6 to 12 months. A navel can take 9 to 18 months. Jewelry that sits in contact with healing tissue for that duration needs to be fully inert, polished to a surface finish that does not harbor bacteria, and free of reactive trace elements. ASTM F-136 titanium satisfies all three requirements. Lower-grade metals do not reliably satisfy any of them.
Titanium can also be anodized to produce color without coating. The anodized layer is a thin titanium oxide formed by an electrical current. It does not add foreign material to the surface, which means anodized titanium remains biocompatible and can be autoclaved for sterile placement in fresh piercings.
Why Buy Internally Threaded Curved Barbells at Khrysos
Khrysos manufactures internally threaded titanium curved barbells to APP and ASTM material standards that most online piercing jewelry retailers do not meet or document. Every lot is traceable, every piece is guaranteed.
APP Phase 1 and 2 Verified: Khrysos meets both levels of the Association of Professional Piercers’ material and quality certification, one of fewer than a hundred verified vendors globally.
ASTM F-136 Titanium with Mill Certificate: Each production lot ships with a mill certificate confirming alloy composition and compliance with implant-grade specifications.
ISO9001-Certified Manufacturing: Production quality is controlled and documented under ISO9001 certification at every stage.
Lifetime Guarantee on Workmanship: Every curved barbell internally threaded to Khrysos specifications is covered for defects in finish, thread integrity, and dimensional accuracy.
Same-Day Shipping and Wholesale Access: Orders ship the same business day. Studio and wholesale pricing is available for piercing professionals.
FAQ
What is the difference between internally threaded and externally threaded curved barbells?
An externally threaded barbell has raised threads on the outside of the post that contact tissue during insertion. A titanium curved internally threaded barbell has a smooth post exterior, with threads recessed inside each end, so nothing abrasive passes through the piercing channel.
Which gauge should I use for my rook piercing?
Most rook piercings are pierced at 16G (1.2mm). If you are replacing jewelry on a healed rook, match the gauge already in your piercing. When in doubt, confirm with your piercer before ordering.
Can I use a post-only shaft with internally threaded ends from another brand?
Yes, as long as the gauge and thread pitch match. Internally threaded jewelry uses a standard thread pitch per gauge, and Khrysos posts are compatible with other APP-standard internally threaded ends at the same gauge.
Is ASTM F-136 titanium safe for a fresh piercing?
ASTM F-136 implant-grade titanium is one of two materials the APP recommends for initial piercing jewelry. It is biocompatible, non-reactive, and can be autoclaved to sterile standards before placement.
What length do I need for a navel piercing?
Most navel piercings use a 14G curved barbell at 10-12mm. A fresh piercing is typically fitted with a slightly longer bar to allow for swelling and downsized after the initial healing phase. Your piercer determines the correct starting length based on your anatomy.
Does Khrysos offer anodized color options for curved barbells?
Anodized options are available in the collection. Anodizing produces color through a titanium oxide layer rather than a surface coating, so the jewelry remains biocompatible and autoclave-safe.
What is the difference between a complete curved barbell and a post-only?
A complete curved barbell includes the post and two ball ends, ready to insert. A post-only shaft ships without ends and is paired separately with internally threaded decorative ends, giving piercers and collectors full control over the end configuration.
Choosing the right internally threaded curved barbell starts with gauge, length, and verified material. Every piece in this collection is made from ASTM F-136 titanium, produced under ISO9001 standards, and backed by the APP verification that professional piercers look for when selecting jewelry for their clients. Browse the collection above and reach out to the Khrysos team for sizing or compatibility questions.